Bought the 2 line kit to replace thre currently on the 2150. No trouble till time to download the fuel pick up line. The second line the smaller sized of the two to go thru that tiny fuel hole is to tiny can stand back and throw the heat in the hole like a auto thru a garage door.Is a feasable to just go ahead and also install that tiny line and also either use some kind of fuel compatable caulk or warm melt adhesive to stop any kind of leaks?Or have to I begin trveling v my calipers to discover the right size fuel line.What I had bought is the 2 line different size kit to execute the replaceing.

You are watching: Poulan 2150 chainsaw fuel line replacement

A drillmotor and an ideal drill little bit is your friend. I routinely open up up them holes to usage Stihl or Echo fuel line. Tygon is no worth much an ext than spit.
Reactions:s sidewall

Supposed to have actually a barbed fitting to connect the two lines with. You install the fitting in the huge line and pull it through the tank come seal the hole. Climate the tiny line in the tank connects to the fitting. Dumb design. Perform as driver suggested. Steve Sidwell
Reactions:svk and 67L36Driver

There was a double barb fitting but it to be on the inside wall return side.So I have to drill the end the fuel suctionline hole and also do away v the little bity hose. Al
There to be a double barb fitting however it to be on the primer return side.So I have to drill the end the fuel suctionline hole and also do away with the little bity hose. Al
Have the Stihl or Echo line in hand and choose a drill bit simply a touch smaller (1/64” ?).The hose barb deal will certainly still work-related as the line is more thick wall.
Do you understand the 1/64th drill little bit is so little you practically have to one-of-a-kind order to acquire one?1/64 is smaller sized than 1/16th which is pretty little also. Al
Al , if you select to usage a 3/16\" OD fuel line instead of the tiny fuel line then a 11/64\" diameter hole will be a snug fit and also is a good fix for the small Poulan saws .

See more: 10 Kilometers Equals How Many Meters To Meters, How Many Meters Are 10 Kilometers

I have refurbished fairly a couple of of that series of Poulan saws. I also typically carry out what what recommended earlier in this tread.The fuel heat from the tank come the carburetor is the smaller sized diameter line. I enlarge the feet in the peak of the fuel tank with which the line feeds through an suitable drill bit, and replace the line with 3/32\" within diameter 3/16\" external diameter Tygon fuel line. In stimulate to get a leak-tight fit of the line with the tank, I usage a 11/64\" drill little bit as scottr recommended above. Ns don\"t reuse a barb at the suggest the fuel line goes through the tank, I just install a single length of fuel line every the means from the carburetor nipple, v the fuel tank, and into the tank v the fuel pickup/filter in ~ the end. I would certainly guess the complete length of that hose ends up being about 9\".