Many Ford Explorers and Mercury Mountaineers were produced with an option well-known as the Ford keyless entry keypad. Part models describe it together SecuriCode as well. That is a five-button numeric keypad that is used to:

Eliminate fumbling for your keysPrevent lockoutsProvide basic entry to your vehicle

The keyless entry provides a five-digit code to unlock the doors as soon as it is gone into correctly. The five-digit code can be changed from the default code set at the manufacturing facility to a user-defined code. The users can collection it to every little thing sequence castle want, providing much better security and also a password they will certainly remember.

It can happen that the code you collection is forgotten, and also you are locked the end of her vehicle. That is also a continuous occurrence that, when a car has been sold, the password isn’t provided to the brand-new owner. If the default password isn’t top top hand either, it have the right to leave the keyless keypad useless and also increase the possibility of being locked the end of your vehicle.

On Ford Explorers and also Mercury Mountaineers, it may be possible to retrieve the five-digit default code manually through a few easy steps.

Method 1 of 5: inspect your documentation

When a Ford explorer or Mercury Mountaineer is offered with the keyless entry keypad, the default code is detailed with the manuals and owner’s products on a card. Retrieve your code from the paperwork.

You are watching: 2003 ford explorer keyless entry code

Step 1: watch in your owner’s manual. Flip v the pages to uncover the card through the code published on it.

If you purchased the auto second-hand, check if the password is written on the within cover through hand.

Step 2: examine your map wallet. Look at in the map wallet friend were listed from the dealer.

The code card may be loosened in the wallet.

Step 3: inspect your gloves box. The password card may be loose in the gloves box, or the code might be created on a sticker in the gloves box.

Step 4: go into the code. To enter your keyless keypad code:

Enter in the five-digit password in orderSelect the associated key to pressPress the 3-4 button within 5 seconds of entering your password to unlock her doorsLock your doors by pushing the 7-8 and 9-10 buttons at the exact same time

Method 2 the 5: locate smart junction box (SJB) 2006-2010

On Ford Explorers and Mercury Mountaineers indigenous 2006 until the design year 2010, the default five-digit keypad code is printed on the clever junction crate (SJB) under the driver’s side of the dash.

Materials Needed

FlashlightScrewdriver or little socket setSmall mirror on one extension

Step 1: look at at your under dash. Open the driver’s door and also lay on your ago in the driver’s footwell area.

It is cramped for an are and friend will obtain dirty if the floor is dirty.

Step 2: Take turn off the under dash cover. Remove the under dash covering if there is one in place.

If over there is one, you may need a driver or a little socket collection and ratchet to remove it.

Step 3: find the SJB module. That is a large black box mounted up under the dash over the pedals. Over there is a long yellow wiring connector the plugs right into it 4-5 customs in width.

Step 4: find the barcode label. The brand is directly listed below the connector facing the firewall.

Use your flashlight to uncover it under the dash.

Step 5: find the code on the module. Situate the five-digit default keypad password on the module. The is under the barcode and is the only five digit number on the label.

Use her extendable winter to acquire a watch of the backside that the module to check out the label.

When the area is illuminated v the flashlight, you should easily have the ability to read the code in the mirror’s reflection.

Step 6: enter the password on the keypad.

Method 3 that 5: find the lab Module

The default keypad code for Explorers and Mountaineer for design years 1999 come 2005 have the right to be uncovered on the remote Anti-Theft Personality (RAP) module. There space two possible locations because that the rap module.

Materials Needed

FlashlightSmall mirror on an extension


Step 1: find your tire readjust compartment. On most 1999 come 2005 Explorers and also Mountaineers, friend can discover the rap module in the compartment whereby the tire readjust jack is located.

Step 2: find the cover for the jack. The cover will certainly be ~ above the driver’s behind in the cargo area.

It is around 4 inches tall and 16 inches wide.

Step 3: remove the cover. There room two lever-style connectors that host the sheathe in place. Background both levers to relax the cover and lift it the end of place.

Step 4: uncover the laboratory module. That is located simply in front of the jack compartment opening, an installed against the side human body panel.

You won’t be able to see the label plainly from this vantage point.

Step 5: review the default keyless code. Bright a flashlight as best you can on the label, then usage a mirror on an extension to review the code off the label. The is the just five-digit password on there.

Step 6: install the jack cover. Placed the two bottom alignment tabs in place, press the panel into its location, and press the two levers under to lock that in place.

Step 7: go into the keyless code.

Method 4 of 5: uncover the lab module on the rear passenger door

Material Needed



Step 1: discover the passenger chair belt panel. Locate the panel wherein the passenger rear seat belt beginning the obelisk area.

Step 2: Pry the panel loose by hand. There space a few tension clips that host it in place. A certain tug from the top should pop the panel off.

Warning: The plastic have the right to be sharp, so you may want to use gloves to eliminate trim panels.

Step 3: remove the seatbelt retractor panel. Pull the panel extending the chair belt retractor away. This dashboard is directly listed below the one you traction off.

You don’t have actually to totally remove this part. The module is right below the various other panel friend removed.

Step 4: Look because that RAP module. Bright a flashlight behind the panel. Girlfriend will view a module with a brand on that which is the laboratory module.

Step 5: obtain the five-digit code. Check out the five-digit password off the label, then snap every the panels earlier in place, lining increase the stress clips through their locations in the body.

Step 6: go into the default keypad password in the keypad.

See more: How Many Different Phone Numbers Are Possible, Area Codes Frequently Asked Questions

Method 5 the 6: usage the MyFord function

Newer Ford Explorers may use a touchscreen screen system well-known as MyFord Touch. The controls comfort and also convenience systems consisting of SecuriCode.

Step 1: press the \"Menu\" button. V the ignition on and the doors closed, press the “Menu” button at the top of the screen.

Step 2: press the “Vehicle” button. This appears on the left next of the screen.

A food selection comes up that contains the option “Door Keypad Code.”

Step 3: select “Door Keypad Code” native the alternative list.

Step 4: collection your keypad code. Get in the default keypad password from your owner’s manual, then get in your brand-new personalized five-digit keypad entrance code.

It is currently set.

Method 5 of 5: contact your Ford dealership

If none of the options were effective in retrieving her default keyless keypad code, friend will need to go come the Ford dealer to have actually a technician retrieve the code from the computer. The technician will usage a diagnostic scanner come retrieve the password from the laboratory or SJB module and provide it come you.

Typically, dealers fee a fee because that retrieving keypad codes for customers. Ask ahead of time what the fee is for the service and also be all set with payment once the procedure has been completed.